Table 1 List of components used to create the circuit board for the OMC setup
From: Modeling exercise using optogenetically contractible Drosophila larvae
Item | Source | Part Number |
|---|---|---|
700 mA Externally dimmable BuckPuck DC Driver | 3021-D-E-700 | |
Rebel Tri-Star Sink-Pad II deep-red LED | SP-01-D2 | |
Sparkfun Red board Arduino-UNO | Sparkfun | DEV-13975 |
Heat sink | ||
 Thermal Adhesive Tape for 20 mm Tri-Star LED Assemblies | LXT-T-12 | |
 Carclo 18° 20 mm Circular Beam Optic | 10,507 | |
 40 mm Round × 30 mm High Alpha Heat Sink - 7.9 °C/W | CN40-30B | |
 5.1 k Ohm - 1/4 W - 5% resistors | – | |
 PNP Transistor | Generic | 2 N3906 |